- Alignment
tools (2)
- Brush,
steel, 8"
- Burnishers
(3)
- Caliper,
dial
- Cold
chisel set, 3 pc.
- Feeler
Gauge
- File
handle
- File
set, 3 piece
- Fuse
puller
- Hacksaw
- Hacksaw
blades (2)*
- Hammer,
ball peen, 12 oz.
- Handle,
driver blades (2): 3-1/8,
4-1/8"
- Hexdriver
blades (9): .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64,
5/32, 3/16"
- Hex
key set, metric 1.5-6mm, 7 pc.
- Hex
key set, 9 pc. foldup, 5/64-1/4"
- Icepick
scribe
-
Knife, electrician's
- Level,
torpedo, magnetic, 9"
- Mirror,
inspection
-
Nutdriver blades (9): 3/16, 7/32, 1/4, 3/8, 9/32,
5/16, 11/32, 7/16, 1/2"
- Penlight
- Pliers
(6): diagonal cutter, 4-1/4"; diagonal cutter,
5-1/4"; groove joint, 10"; long nose, 4-3/4;
long nose with cutter, 6-3/4"; retaining ring
internal/external
- Pliers,
lineman's heavy duty
- Pliers,
locking, 7"
- Punch,
center, 3/32"
|
- Punch,
pin (2); 1/16, 1/8"
- Reamer,
handled, 7-1/2"
- Rule,
stainless, 6"
- Screwdriver,
offset ratchet, slotted/Phillips
- Screwdriver,
Phillips No.0 x 21/2",
pocket clip
- Screwdriver,
Phillips (3): No.1 x 3";
No.2 stubby; No.2 x 4"
- Screwdriver,
slotted 3/32 x 2", pocket clip
- Screwdriver,
slotted (6): 1/8 x 4"; 1/8 x 8"; 3/16 x
3"; 1/4" stubby; 1/4 x 4"; 5/16 x 6"
- Screwdriver
set, jeweler's, 7 pc.
- Screwstarter,
Phillips/slotted
- Socket
set, 1/4" drive, 14 pc.
- Solder
aid, fork and brush
- Soldering
iron, 115V (240V opt.)
- Spring
tool, pull
- Spring
tool, push
- Tape
measure, 12'/3.5m
- Tapping
tool
- Tweezers,
reverse action
- Wire
crimper/stripper
- Wire
stripper/cutter
- Wrench,
adjustable (2): 4", 8"
- Wrench
set, combination, 10 pc. 5/16-7/8"
- Wrench
set, ignition, 8 pc.
- Tote
Tool case with pallets
|
